Unbilled revenue is revenue a business has earned but has not yet invoiced. The work is done, the goods are delivered or the service has been used, and the contract says the customer owes for it. The invoice simply has not gone out yet.
It is a normal part of accrual accounting. Revenue follows performance, not paperwork. But every unbilled balance carries a quiet risk: until it becomes an invoice, nobody is chasing it. Some of it is billed next month as planned. Some of it is billed late. And some of it is never billed at all.
This entry explains what unbilled revenue is, how it is recorded, why it builds up, how it differs from deferred revenue and accounts receivable, and how finance teams keep it under control.
This is general information, not accounting advice. The right treatment depends on the accounting standard you report under and on the wording of each contract. Check specific cases with your auditors or accounting advisers.
Unbilled Revenue Defined in Plain Terms
Unbilled revenue is the gap between what you have earned and what you have invoiced, at a point in time. If you have recognised $500,000 of revenue on a contract to date and invoiced $420,000, the $80,000 difference is unbilled.
You will see several names for it:
Unbilled revenue or unbilled receivables (common in management reporting and ERP systems).
Accrued revenue (the general bookkeeping term for revenue recorded before it is billed).
Contract asset (the term used by IFRS 15 and ASC 606 when the right to payment is still conditional).
These labels overlap but are not identical. Under the revenue standards, the key question is not “have we sent an invoice?” but “is our right to be paid unconditional?”
How Unbilled Revenue Is Recorded Under IFRS 15 and ASC 606
Both IFRS 15 and US GAAP Topic 606 say a company recognises revenue as it transfers promised goods or services to the customer. IFRS 15 has applied to annual periods beginning on or after 1 January 2018 and replaced IAS 11 and IAS 18. Billing timing is a separate matter, set by the contract.
When revenue runs ahead of billing, the balance lands in one of two places:
Unbilled receivable. If the company already has an unconditional right to payment, meaning only the passage of time stands between it and the cash, the amount is a receivable even though no invoice exists yet. PwC’s Viewpoint guide to ASC 606 presentation says that in this situation the entity “should record an unbilled receivable”, and that invoicing alone does not prove the right is unconditional.
Contract asset. If the right to payment still depends on something other than time, such as finishing another deliverable or reaching an acceptance milestone, the amount is a contract asset.
ACCA’s technical article on IFRS 15 contract balances gives a simple way to work out the contract position: take revenue recognised to date and subtract amounts invoiced to date. A positive result is a contract asset. A negative result is a contract liability. ACCA also stresses that these balances are kept distinct from trade receivables, which arise when an invoice is issued.
When the invoice is raised: debit accounts receivable, credit unbilled revenue.
When the customer pays: debit cash, credit accounts receivable.
Unbilled revenue is an asset; whether it is a receivable or a contract asset depends on whether the right to payment is unconditional.
ERP systems automate much of this. Microsoft’s documentation for Dynamics 365 Project Operations describes an “Accrue revenue” option: when it is on, unbilled sales on time-and-material projects post to the ledger as a debit to a WIP sales value account and a credit to an accrued revenue account, and the accrual is reversed when the customer is invoiced.
Why Unbilled Revenue Builds Up
Unbilled revenue is not a sign that something is wrong. Many contracts are designed to create it. Common causes include:
Billing in arrears. Usage, transaction volumes, overages and time-and-material work are often invoiced after the period ends. At month end, a full month of usage is earned but not billed.
Milestone billing. Long projects may be invoiced only when a milestone is reached or accepted, while revenue is recognised as work progresses.
Billing calendars that do not match the close. A contract billed on the 15th of each month leaves half a month unbilled at every month end.
Pending data. Invoices may wait for meter readings, timesheet approvals, usage files or customer purchase order numbers.
Contract changes. A new contract amendment can change rates, scope or volumes before the billing system has been updated.
The first three causes are timing. They resolve themselves when the next invoice runs. The last two are where problems start, because the billing depends on someone noticing, chasing and updating.
Why Unbilled Revenue Matters to Finance Teams
Unbilled revenue affects cash, reporting and control at the same time.
Cash is delayed. Customers do not pay invoices they have not received. The longer revenue sits unbilled, the longer the business funds work it has already delivered, and the later the payment terms start to run.
Old balances become harder to collect. An invoice raised months after the service can trigger questions, disputes or simple refusals. Contracts may also set time limits on back-billing. Whether a late invoice is still enforceable depends on the contract wording and the governing law.
Estimates need support. Unbilled balances are often estimates. Auditors will want to see how they were calculated and that they tie back to the contract and to delivery evidence.
Some of it is never billed. This is the costly part. A price escalator that was never applied, a usage tier that the billing system did not pick up, a minimum purchase commitment shortfall nobody invoiced, or a milestone that was reached but never flagged: none of these show up as a late invoice. They show up as nothing. This is one form of contract value leakage, and on the sell side it is usually called revenue leakage.
Worked Example of Unbilled Revenue
All figures below are illustrative sample numbers, not data from any real company.
A services company signs a contract with three billing streams:
Platform fee: $20,000 per month, invoiced on the 1st of each month in advance.
Usage: $0.50 per transaction above 100,000 per month, invoiced in arrears on the 5th of the following month. The rate rises 4% on each contract anniversary under a price escalation clause.
Implementation: $30,000, invoiced only when the customer signs acceptance.
At 31 October:
Stream
Earned to date
Invoiced to date
Unbilled
Likely classification
Platform fee (October)
$20,000
$20,000
$0
Already billed
Usage (140,000 transactions, at the $0.50 rate in the billing system)
$20,000
$0
$20,000
Unbilled receivable (only time stands before billing)
Implementation (60% complete)
$18,000
$0
$18,000
Contract asset (payment depends on acceptance)
Total
$58,000
$20,000
$38,000
So far, this is normal timing. The usage will be invoiced on 5 November. The implementation will be invoiced on acceptance.
Now add a problem. The contract anniversary passed in September, so the usage rate should be $0.52, not $0.50. The billing system was never updated. October usage above the threshold should be 40,000 x $0.52 = $20,800. The invoice will say $20,000. That $800 per month is earned, unbilled and, unless someone checks the invoice against the contract, it will stay unbilled. If usage stays at that level, it adds up to $9,600 over twelve months from one missed clause.
The example also shows why unbilled revenue needs two checks, not one:
Timing check: Is everything that was earned going to be invoiced on schedule?
Accuracy check: Is the amount about to be invoiced what the contract actually says?
Illustrative: the $38,000 is normal timing, but the $800 a month from the missed escalator will never be invoiced unless someone checks the contract.
Unbilled Revenue vs. Deferred Revenue vs. Accounts Receivable
These three terms describe different positions in the same cycle.
Term
What happened
Balance sheet side
Example
Unbilled revenue
Performance delivered, not yet invoiced
Asset (unbilled receivable or contract asset)
October usage, billed in November
Accounts receivable
Invoice issued, not yet paid
Asset (receivable)
November invoice awaiting payment
Deferred revenue
Cash received or billed before performance
Liability (contract liability)
Annual subscription paid upfront
Unbilled revenue vs. deferred revenue. They are mirror images. Unbilled revenue means you have done the work but not billed. Deferred revenue means you have billed or been paid but have not done the work yet. PwC notes that a contract liability “may be referred to as deferred revenue.”
Unbilled revenue vs. accounts receivable. Accounts receivable starts when an invoice is raised. Unbilled revenue is everything earned before that point. Under the revenue standards, an unbilled amount can still be a receivable if the right to payment is unconditional.
Unbilled revenue vs. contract value. Metrics like annual contract value and total contract value describe what a contract is worth. Unbilled revenue describes what has been earned against it but not yet invoiced.
How to Track and Control Unbilled Revenue
Good control comes down to a short list of habits.
Reconcile earned to invoiced every month. For each contract, compare revenue recognised to date with amounts invoiced to date. Investigate any balance that is growing without a clear reason.
Age the unbilled balance. Treat unbilled revenue like receivables and age it: 0-30 days, 31-60, 61-90, over 90. Anything old is either a billing failure, a dispute or an estimate that needs revisiting.
Tie every balance to a billing trigger. Each unbilled amount should point to the event that will turn it into an invoice: a date, a usage file, a milestone sign-off. If there is no trigger, there may be no invoice.
Check the contract, not just the billing system. Billing systems hold the terms someone entered at set-up. Escalators, tiered pricing, rate cards, minimum commitments, automatic renewal clauses and amendments change over time. Compare invoices against the signed contract on a regular cycle.
Use clear ownership. Decide who owns each unbilled balance: billing operations, the project manager or the account owner. Unowned balances drift.
Document estimates. Keep the workings behind each estimate, with links to the contract clause and the usage or delivery evidence. This makes the month-end close and the audit easier.
Strong contract obligation management supports all of this, because it gives finance a current list of what each customer has agreed to pay and when.
Where ObligaAI Fits
ObligaAI’s revenue leakage product is built for the accuracy check described above. Its stated aim is to “bill every dollar your contracts say you earned.”
ObligaAI compares customer contracts with what was actually invoiced. It checks fees, escalators, usage tiers, discounts, minimums, milestones and renewal terms, with contract-to-invoice, usage-to-invoice and milestone-to-invoice matching. Each finding shows the clause, the invoice, the shortfall, its dollar value and a recommended action, linked to the exact contract passage with a confidence rating.
It is advisory first. Findings are suggestions with the clause attached, never automatic changes, and no invoice is changed until the right person signs it off. Finance decides what to correct and when. It is designed as an overlay, not a replacement: it works beside the billing and contract systems you already run.
If unbilled amounts you expected are going missing, you can start free or start a conversation with the team.
Frequently Asked Questions About Unbilled Revenue
Is unbilled revenue an asset or a liability?
It is an asset. It represents money the business has earned and expects to collect. Depending on whether the right to payment is unconditional, it is presented as an unbilled receivable or as a contract asset.
Is unbilled revenue the same as accrued revenue?
In everyday use, mostly yes. Both describe revenue recorded before an invoice is issued. “Accrued revenue” is the broader bookkeeping term. Under IFRS 15 and ASC 606, the balance is classified as a contract asset or a receivable, so check which term your reporting framework and ERP use.
Is unbilled revenue the same as a contract asset?
Not always. A contract asset is a conditional right to payment. If the only thing left is the passage of time, the amount is a receivable, even if unbilled. Many unbilled balances are contract assets, but not all.
How is unbilled revenue different from deferred revenue?
Unbilled revenue is earned but not billed. Deferred revenue is billed or paid but not yet earned. One is an asset, the other a liability.
Can a company still invoice old unbilled revenue?
Often, but not always. Contracts may limit how late an invoice can be raised, and customers may dispute old charges. Whether a late invoice is enforceable depends on the contract wording and governing law. This is not legal advice.
What is a healthy level of unbilled revenue?
There is no universal benchmark. It depends on your billing model. A business that bills usage in arrears will always carry some. What matters is that each balance has a clear billing trigger, is ageing normally and matches the contract.